Tool Kit


[ Mikuni Products ] [ Customer Support and Feedback ] [ Site Contents ] [Back to Contents Page]




Back Up Next

horizontal rule

Easy

MIKUNI EASY TOOL KIT     HSR 42/45/48       

Kit Contents:

bullet Easy Wrench 17mm x 11/16” open end wrench
bullet Mini - T Jet Wrench 
bullet 2.5mm Ball End Allen bit x 6mm hex

Use the Easy Wrench to loosen/tighten the choke cable bracket bolt and to remove/replace the drain plug.

Use the Mini – T Jet Wrench to remove/replace your main jet.  Includes Phillips/Flat Head bit to remove/replace float bowl screws and to adjust the air screw.  Also includes a storage cavity for extra jets.

Use the 2.5mm Ball End Allen bit to remove/replace the needle retainer clip located above the throttle slide.

 
MIKUNI TOOL KIT MK-404

This handy little kit contains all the tools necessary to make jetting changes, perform normal maintenance, as well as disassemble and rebuild any Mikuni carburettor.  Included in the plastic carrying case is:
bullet

a multi-purpose wrench with ruler markings

bullet

screwdriver with assorted blades and sockets

bullet

socket screwdriver for main jets, all in a plastic carrying case.

 

horizontal rule

 

 [ Up ] [ Harley Davidson HSR42/45/48  Carbs ] [ RS Smoothbore Kits ] [ Flat Slide Carbs w. Accelerator Pumps ] [ Flat Side Carbs - Non Pump ] [ VM Round SLide Carbs ] [ Mikuni Carbs for Jet Skis ] [ Pulse Fuel Pumps ] [ Rubber Mounting Flanges ] [ Power Jet Kits ] [ Jets ] [ Throttle Slides ] [ Tool Kit ] [ Pocket Tuner ] [ Needles & Seats ] [ Clothing ]

horizontal rule

T. D. Hatrick and Co., Pty Ltd, 93 Ingham Rd, Townsville, 4810
Phone: 07 47712677    Fax:  07 47211616  P.O. Box 5302, Townsville 4810
Email: tdh@mikunioz.com 
Copyright © 2002  Oz Effects Web Design. All rights reserved.
Last modified: Tuesday September 03, 2002.