This Quick Action VMX throttle and cable assembly is for use with Mikuni VM carbs ranging from 30mm up to 38mm & all TM non pump Mikuni carburetors 36mm thru to 41mm.
The cable has a total length of 1050mm.
The exposed inner wire length is matched for use in Mikuni VM carbs using keyhole type cable attachment to the throttle valve. Use of this throttle and cable combo with OEM VM carb versions, fitted with a cable holder that is screwed to the slide, is restricted to carb sizes of 36mm and larger.
This cable comes with a 90 degree angled lower fitting for threading into the top of your carb replacing the OEM adjuster for use in situations where space is very restricted. This does often require the cable to be fixed in place before fitting a VM carb as unscrewing the carb top with the carb in place may become impossible in some motorcycles.
These premium grade cables use a Nylon lined outer housing. The Nylon liner inside the outer cable housing conduit is for reduced friction and heat resistance. All throttle cables must be lubricated during installation with cable lube or a very light oil such as 3 in 1 to avoid clogging. Besides the need to lubricate the inner wire in the housing, the cable end barrels at their pivot points should be lubricated with water proof grease. If you need to clean your cable which is particularly relevant for dirt bikes. We recommend using WD40 or a very light oil such as 3 in 1. This effectively washes away dirt from the cable, without clogging it.
Our 7/8″ (22mm) VMX Quick Action Competition Throttle assembly is designed with the ideal ratio for use on our 30 thru 38mm non-pump type Mikuni TM and VM carburetors.
This manufacturer has been making aftermarket throttles, cables and other products of quality for Mikunioz since the mid-1980’s. The VMX Quick Action Comp Throttle is a sleek looking classic design which will clear the brake master cylinder on the handlebar.